To get started, please follow the steps below:
- Connect the Ethernet cable to one of the open ports on the back of your broadband router, then connect the power supply into a plug socket.
- You'll see four solid led lights on the Hub and then the last green light (showing power connection) will start to flash. The flashing green start up sequence can take anything between 3-5 minutes, so please do not disconnect the Hub during this time.
- Once the AOne Hub has two solid green lights (the first and the last) it is ready to pair with AOne devices.
- Start AOne application on your phone and follow on-screen instructions.
If you need any further help or have any questions, please email us at email@example.com, raise a support ticket, using the link near the bottom of this page or clicking on the HELP button (a blue circle with a question mark) or call us on:
UK: +44 (0) 1707351859
Phone lines are open Mon-Fri 9am-5pm.